LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Horns >> Horn System >> Repair Instructions >> Horn Replacement - Right >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to LIFTING & JACKING THE VEHICLE .
    2. Fig 1: Horn & Radiator Support
    GM331104Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the horn electrical connector.
  3. Remove the horn bolt. Reposition the park/turn signal lamp wiring harness for additional clearance.
  4. Remove the horn (2) from the radiator support (1).
scientia non olet · About LEMON Manuals