Finding a Station - Uplevel/Luxury: Notes

AM-FM

• Press the AM/FM push-button to switch between AM, FM1, and FM2.
• The display indicates the current band.

TUNE

1. Press lightly on the TUNE control in order to release the tune control from the tune control's recessed position.
2. Rotate the TUNE knob to the right in order to increase the frequency.
3. Rotate the TUNE knob to the left in order to decrease the frequency.
4. Push the TUNE control back in order to store the frequency setting while not tuning.

SEEK

• Press the right arrow key in order to tune into the next higher frequency.
• Press the left arrow key in order to tune into the next lower frequency.

  Audio is muted during the SEEK operation.

SCAN

1. Press and hold SEEK for 2 seconds. SCAN will appear on the display.
2. Use SCAN in order to listen to each radio station for a few seconds.
3. Press SEEK again in order to stop scanning.