LEMON Manuals
: Even more car manuals for everyone
Home
>>
GMC
>>
2002
>>
Sierra 1500 HD, RWD
>>
Repair and Diagnosis
>>
Brakes
>>
Mechanical - Hydraulic
>>
Hydraulic Brakes
>>
Repair Instructions
>>
Stop Lamp Switch Replacement
>>
Removal Procedure
Removal Procedure
Disconnect the electrical connector from the stop lamp switch (2).
Remove the pushrod retaining clip (4).
Remove the stop lamp switch (2).
Fig 1: Locating Stop Lamp Switch
Courtesy of GENERAL MOTORS CORP.