LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the electrical connector from the fluid level sensor.
  2. Remove the fluid level sensor (1). Use a needle nose pliers in order to compress the locking tabs at the opposite side of the master cylinder.
    Fig 1: Locating Fluid Level Sensor
    G01669037Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals