LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pipe Replacement >> Installation Procedure

Installation Procedure

  1. Bend the brake pipe to achieve proper fit.
  2. Install the brake pipe to the vehicle. Maintain a clearance of 19 mm (3/4 in) for all moving or vibrating components.
  3. Install the brake pipe fasteners to the vehicle.
  4. Connect the brake pipe fittings.
    • Tighten the brake pipe fittings to the BPMV or the wheel jounce hoses to 25 N.m (18 lb ft).
    • Tighten the brake pipe fittings to the master cylinder to 25 N.m (18 lb ft).
  5. Bleed the hydraulic brake system. Refer to ABS AUTOMATED BLEED PROCEDURE .
scientia non olet · About LEMON Manuals