LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pedal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the pushrod retaining clip (4).
  2. Remove the stoplamp switch (2) and the pushrod (3) from the brake pedal stud (1).
    Fig 1: Locating Stoplamp Switch
    G01669039Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut from the brake pedal bolt.
    4. Fig 2: Brake Pedal Bolt
    G01669040Courtesy of GENERAL MOTORS CORP.
  4. Remove the brake pedal bolt.
  5. Remove the brake pedal.
scientia non olet · About LEMON Manuals