LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pedal Replacement >> Installation Procedure

Installation Procedure

  1. Install the brake pedal.
  2. Install the brake pedal bolt.
  3. Install the nut to the brake pedal bolt. Hold the nut with a wrench and tighten the brake pedal bolt to 47 N.m (35 lb ft).
  4. Install the pushrod (3) and the stoplamp switch (2) to the brake pedal pin (1).
  5. Install the pushrod retaining clip (4).
scientia non olet · About LEMON Manuals