Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Backing Plate Bolts | 135 N.m | 100 lb ft |
| Brake Hose to Caliper Bolt, Front | 40 N.m | 30 lb ft |
| Brake Hose to Caliper Bolt, Rear | 40 N.m | 30 lb ft |
| Brake Caliper Mounting Bolt Front | 108 N.m | 80 lb ft |
| Brake Caliper Mounting Bolt Rear - 15 series | 42 N.m | 31 lb ft |
| Brake Caliper Mounting Bolt Rear - 25/35 series | 108 N.m | 80 lb ft |
| Caliper Bleed Screw | 12 N.m | 106 lb INCH |
| Caliper Mounting Bracket Bolt Rear -- JC5/JH5 | 200 N.m | 148 lb ft |
| Caliper Mounting Bracket Bolt Rear -- JH6 | 165 N.m | 122 lb ft |
| Caliper Mounting Bracket Bolt Rear -- JH7 | 300 N.m | 221 lb ft |
| Caliper Mounting Bracket Bolt Rear -- NYS | 200 N.m | 148 lb ft |
| Caliper Mounting Bracket to Knuckle, Front - 15 series | 175 N.m | 129 lb ft |
| Caliper Mounting Bracket to Knuckle, Front - 25/35 series | 300 N.m | 221 lb ft |
| Front Wheel Hub Extension Nuts | 130 N.m | 96 lb ft |
| Intermediate Cable Threaded Rod Nut | 3.5 N.m | 31 lb ft |
| Park Brake Cable Bracket to Knuckle Bolt -- NYS | 61 N.m | 45 lb ft |
| Quarter Shaft Shield | 25 N.m | 18 lb ft |