LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Cab & Chassis, & Hd) >> Removal & Installation >> Rear Disc Brake Backing Plate >> Installation

Rear Disc Brake Backing Plate: Installation

  1. Install the backing plate.
  2. Install the backing plate bolts. Tighten the bolt to specification. See TORQUE SPECIFICATIONS  .
  3. Install the rear disc brake rotor. See BRAKE ROTOR  .
  4. Install the tire and the wheel assembly.
    NOTE: Pump the brake pedal until it is firm before moving the vehicle. Check the brake fluid level in the master cylinder after pumping the brakes.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals