LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Cab & Chassis, & Hd) >> Removal & Installation >> Park Brake Cable >> Removal

Park Brake Cable: Removal

  1. Release the park brake.
  2. Raise the vehicle and support the vehicle with safety stands.
  3. Remove the cotter pin. See Fig 1 .
  4. Remove the clevis pin.
  5. Disconnect the clevis from the cable.
  6. Disconnect the grommet from the bracket.
  7. Remove the cable from the clip. See Fig 2 .
  8. Disconnect the grommet from the body.
  9. Disconnect the retaining fingers from the lever. See Fig 3 .
  10. Remove the cable assembly.
Fig 1: Removing Cotter Pin
G00317538Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Cable From Clip
G00317539Courtesy of GENERAL MOTORS CORP.
Fig 3: Disconnecting Retaining Fingers
G00317540Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals