LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes (Cab & Chassis, & Hd) >> Removal & Installation >> Combination Valve >> Removal

Combination Valve: Removal

  1. Prior to replacement of the combination valve, note the identification code on the valve. It is necessary to have the proper code when replacing the valve.
  2. Remove the combination valve electrical connector.
  3. Remove the front and rear brake pipes.
  4. Remove 3 Allen bolts securing combination valve to the Brake Pressure Modulator Valve (BPMV). See Fig 1 .
  5. Remove the combination valve from the BPMV.
  6. Remove 2 transfer tubes.
Fig 1: Removing Combination Valve
G00317533Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals