Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Rotor

Discard Thickness ⁽¹⁾

1.366 (34.7)

Maximum Allowable Lateral Runout

0.002 (0.05)

Maximum Allowable Scoring

0.059 (1.5)

Maximum Allowable Thickness Variation

0.001 (0.025)

Minimum Allowable Thickness After Refinish

1.382 (35.1)

Thickness (NEW)

1.428-1.443 (36.26-36.64)

⁽¹⁾	All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications. See BRAKE ROTOR under REMOVAL & INSTALLATION.