LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Switch Replacement - Hot & Cold Cupholder >> Removal Procedure

Removal Procedure

  1. Remove the cupholder assembly. Refer to Cupholder Replacement (Except Pro)  or Cupholder Replacement (Pro)  .

    Important:  Observe the orientation of the switches. The red lights points towards the rear of the vehicle.

  2. Disconnect the wire connectors from the 2 switches.
    • Switch 1 is the power switch.
    • Switch 2 is the hot and cold switch.
  3. Remove the defective switch by pushing in the retaining tabs (1) while pushing the switch outwards.
    Fig 1: Switch Retaining Tabs
    G01712771Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals