LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Center Console End Panel Replacement >> Removal Procedure

Removal Procedure

  1. Open the center console lid and remove the storage bin. Refer to Console Storage Bin Replacement (Non-Luxury) , Console Storage Bin Replacement (Luxury) , or Console Storage Bin Replacement (Pro)  .
  2. Remove the rear cupholder from the end panel. Refer to Cupholder Replacement - Front Floor Console .
  3. Remove the 4 retaining screws (1).
    Fig 1: Cupholder Retaining Screws
    G01712851Courtesy of GENERAL MOTORS CORP.
  4. Remove the top 2 retaining screws (1).
    5. Fig 2: Cupholder Top Retaining Screws
    G01712852Courtesy of GENERAL MOTORS CORP.
  5. Move the end panel rearwards to gain access to the electrical connectors.
  6. Remove the end panel from the console.
  7. Remove the rear seat heater switch, if equipped. Refer to HEATED SEAT SWITCH REPLACEMENT - REAR .
  8. Remove the rear seat audio controls, if equipped. Refer to AUDIO CONTROL REPLACEMENT - REAR SEAT .
  9. Remove the console floor lamp, if equipped. Refer to CONSOLE LAMP REPLACEMENT .
  10. Remove the power outlets from the end panel, if equipped.
scientia non olet · About LEMON Manuals