LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hose - Rear >> Removal

Brake Hose - Rear: Removal

  1. Raise the vehicle.
  2. Support the vehicle with safety stands.
  3. Clean the dirt and foreign material from the brake hose and brake pipe fitting.
  4. Install a rubber cap or plug on the brake pipe fitting in order to prevent brake fluid loss and contamination.
  5. Using a backup wrench, disconnect the brake hose and brake pipe fitting.
  6. Remove the brake hose retainer.
  7. Remove the brake pipe from the brake junction block.
  8. Remove the brake junction block mounting bolt.
  9. Remove the brake hose.
scientia non olet · About LEMON Manuals