Activating System (Avalanche, Bravada, Envoy, Envoy XL, Escalade, Escalade EXT, Sierra, Silverado, Suburban, Tahoe, TrailBlazer, TrailBlazer XL, Yukon & Yukon XL)

1. Remove key from ignition switch. Ensure AIR BAG fuse is still removed. Connect passenger air bag 2-pin Yellow SIR connector behind glove box. Install CPA clip. Connect driver air bag 2-pin Yellow SIR connector at base of steering column. Install CPA clip.
2. Install AIR BAG fuse in fuse block. Staying away from both air bags, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.

Fig 1: Locating Driver Air Bag Yellow 2-Pin Connector (Avalanche, Bravada, Envoy, Envoy XL, Escalade, Escalade EXT, Sierra, Silverado, Suburban, Tahoe, TrailBlazer, TrailBlazer XL, Yukon & Yukon XL)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Locating Passenger Air Bag Yellow 2-Pin Connector (Avalanche, Bravada, Envoy, Envoy XL, Escalade, Escalade EXT, Sierra, Silverado, Suburban, Tahoe, TrailBlazer, TrailBlazer XL, Yukon & Yukon XL)

Courtesy of GENERAL MOTORS CORP.