Brake Fluid Loss
- Were you sent here from the Hydraulic Brake Symptom Table? If so, go to next step. If not, go to STARTING POINT - HYDRAULIC BRAKES under TROUBLESHOOTING.
- Inspect the hydraulic brake system for proper operation. See HYDRAULIC BRAKE SYSTEM DIAGNOSIS under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 7. If not, go to next step.
- Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM DIAGNOSIS under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 7. If not, go to next step.
- Inspect the drum brake system, if equipped, for proper operation. See DRUM BRAKE SYSTEM DIAGNOSIS under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 7. If not, go to STARTING POINT - HYDRAULIC BRAKES under TROUBLESHOOTING.
- Separate the master cylinder from the vacuum brake booster. Do not disconnect any brake pipes. See MASTER CYLINDER REPLACEMENT under REMOVAL & INSTALLATION. Inspect the rear of the master cylinder for a brake fluid leak. Inspect for brake fluid in the vacuum brake booster. Did you find a brake fluid leak? If so, go to next step. If not see STARTING POINT - HYDRAULIC BRAKES under TROUBLESHOOTING.
- Replace the brake master cylinder and the vacuum brake booster. See MASTER CYLINDER REPLACEMENT and VACUUM BRAKE BOOSTER under REMOVAL & INSTALLATION. After repairs are complete, go to next step.
- Road test the vehicle to confirm proper operation. See BRAKE SYSTEM VEHICLE ROAD TEST under TROUBLESHOOTING. Is the condition still present? If so, go to step 2. If not, system is okay.