LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Vacuum Brake Booster >> Removal

Vacuum Brake Booster: Removal

  1. Apply the parking brake.
  2. Remove the master cylinder away from the vacuum booster. See MASTER CYLINDER REPLACEMENT .
  3. Support the master cylinder.
  4. Disconnect the check valve from the vacuum booster. See VACUUM BRAKE BOOSTER CHECK VALVE AND/OR HOSE .
  5. Remove the left closeout/insulator panel.
  6. Remove the pushrod retainer from the brake pedal pin.
  7. Remove the stop light switch and the pushrod from the brake pedal pin.
  8. Remove the steering column support bracket. See appropriate STEERING COLUMN article in STEERING.
  9. Remove the vacuum booster mounting nuts.
  10. Remove the vacuum booster assembly and gasket. See Figure.
scientia non olet · About LEMON Manuals