LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stop Light Switch >> Installation

Stop Light Switch: Installation

  1. Install the electrical connector to the stop light switch.
  2. Install the stop light switch and the pushrod to the brake pedal pin. See Fig 1.
  3. Install the pushrod retainer on the brake pedal pin. The retainer will snap into place.
Fig 1: Removing & Installing Stop Light Switch
G00305465Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals