LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Cable - Rear RWD Pickups >> Installation

Park Brake Cable - Rear RWD Pickups: Installation

  1. Install the park brake cable in the chassis and rear axle housing retainers.
  2. Install the rear park brake cable in the backing plate.
  3. Install the park brake cable in the park brake level.
  4. Install the rear brake shoes. See DRUM BRAKE SHOE .
  5. Install the park brake cable to the equalizer.
  6. Install the park brake cable in the park brake cable connector. See Fig 1.
  7. Install the rear brake drums. See BRAKE DRUM REPLACEMENT .
  8. Using a screwdriver, adjust the rear brake shoes. See DRUM BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  9. Adjust the park brakes. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  10. Lower the vehicle.
Fig 1: Identifying Park Brake Connector
G00305466Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals