LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Reservoir >> Removal

Master Cylinder Reservoir: Removal

  1. Remove the master cylinder from the vehicle. See MASTER CYLINDER REPLACEMENT .
  2. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only at the flange.
  3. Carefully remove the brake master cylinder reservoir retaining pins. See Fig 1.
  4. Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder. See Fig 2.
  5. Remove the seals from the master cylinder.
Fig 1: Removing & Installing Reservoir Retaining Pins
G00305454Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Reservoir
G00305455Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals