LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Fluid Level Sensor >> Removal

Master Cylinder Fluid Level Sensor: Removal

  1. Disconnect the electrical connector from the fluid level sensor.
  2. Remove the fluid level sensor. Use a needle nose pliers in order to compress the locking tabs at the opposite side of the master cylinder. See Figure.
scientia non olet · About LEMON Manuals