LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Brake Backing Plate - Rear >> Removal

Disc Brake Backing Plate - Rear: Removal

  1. Release the park brake, if applied.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Remove the brake rotor. See BRAKE ROTOR - REAR .
  5. Remove the Axle Shaft. See appropriate AXLE SHAFT article in DRIVELINE/AXLES.
  6. Remove the park brake shoe. See PARK BRAKE SHOE REPLACEMENT .
  7. Remove the backing plate nuts. See Figure.
  8. Remove the backing plate from axle housing flange.
scientia non olet · About LEMON Manuals