LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hose - Rear >> Installation

Brake Hose - Rear: Installation

  1. Install the brake junction block mounting bolt. Tighten the brake junction block bolt to specification. See TORQUE SPECIFICATIONS .
  2. Install the brake hose to the brake junction block. Tighten the brake hose fitting to specification. See TORQUE SPECIFICATIONS 
  3. Install the brake hose fitting to the brake pipe fitting. Tighten the brake hose fitting to specification. See TORQUE SPECIFICATIONS .
  4. Bleed the hydraulic brake system. See HYDRAULIC BRAKE SYSTEM - MANUAL  or HYDRAULIC BRAKE SYSTEM - PRESSURE  under BLEEDING.
  5. Remove the safety stands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals