LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hose - Front Single Piston Caliper >> Installation

Brake Hose - Front Single Piston Caliper: Installation

  1. Install the NEW copper gaskets on the brake hose bolt.
  2. Install the brake caliper bolt to the brake caliper. Tighten the brake hose bolt to specification. See TORQUE SPECIFICATIONS .
  3. Remove the plug or cap from the exposed brake pipe fitting.
  4. Install the brake hose to the brake pipe.
  5. Using a backup wrench on the brake pipe fitting, tighten the brake hose fitting. Tighten the brake hose fitting to specification. See TORQUE SPECIFICATIONS .
  6. Install the brake pipe retaining clips.
  7. Bleed the hydraulic brake system. See HYDRAULIC BRAKE SYSTEM - MANUAL  or HYDRAULIC BRAKE SYSTEM - PRESSURE  under BLEEDING.
  8. Install the tire and wheel assembly. See TORQUE SPECIFICATIONS .
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals