LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Adjusting Screw Replacement >> Installation

Adjusting Screw Replacement: Installation

  1. Lubricate the brake shoe backing plate, the adjusting screw threads, socket and socket face with a thin coat of high temperature silicone lubricant.
  2. Install the adjusting screw assembly and the adjusting screw spring on the brake shoes. The coils of the adjusting screw spring must not touch the adjusting screw.
  3. Install the brake shoes on the backing plate.
  4. Install the strut spring on the park brake strut.
  5. Install the park brake strut.
  6. Install the actuator lever and the lever pivot.
  7. Install the actuator lever return spring.
  8. Install the hold down pins.
  9. Install the hold down springs.
  10. Install the brake shoe guide.
  11. Install the brake shoe return springs.
  12. Install the brake drum. See BRAKE DRUM REPLACEMENT .
  13. Install the tire and wheel assembly.
  14. Adjust the brakes. See DRUM BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  15. Lower the vehicle.
scientia non olet · About LEMON Manuals