Brake Warning System Description

The Body Control Module (BCM) detects that the park brake is engaged. The IPC receives a class 2 message from the BCM requesting illumination.
The Electronic Brake Control Module (EBCM) detects a low brake fluid condition. The IPC receives a class 2 message from the EBCM requesting illumination.
The EBCM detects an ABS malfunction which disables Dynamic Rear Proportioning (DRP). The IPC receives a class 2 message from the EBCM requesting illumination.
The IPC performs the bulb check at the start of each ignition cycle. The brake warning indicator illuminates for approximately 3 seconds before turning OFF.
The IPC detects a loss of class 2 communications with the BCM or with the EBCM.