LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments & Inspection >> Park Brake >> Park Brake Hardware Inspection

Park Brake Hardware Inspection

  1. Raise the vehicle.
  2. Remove the tire and wheel.
  3. Remove the rear brake drum. See BRAKE DRUM REPLACEMENT  under REMOVAL & INSTALLATION.
  4. Using denatured alcohol, clean the rear brake assembly.
  5. Using non lubricated filtered air, dry the rear brake assembly.
  6. Visually inspect the park brake hardware for the following: Excessive corrosion. Excessive stretching. Broken components. Bent components. Twisting or binding Missing components.
  7. If any of the conditions listed were found, the park brake hardware requires replacement.
  8. Install the rear brake drum. See BRAKE DRUM REPLACEMENT  under REMOVAL & INSTALLATION.
  9. Install the tire and wheel.
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals