LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Envoy RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Reservoir >> Removal

Master Cylinder Reservoir: Removal

  1. Remove the brake master cylinder assembly. See MASTER CYLINDER  .
  2. Drain the brake fluid from the reservoir.
    3. CAUTION: Do not clamp on the master cylinder body. Doing so may damage the master cylinder.
  3. Clamp the flange of the master cylinder body in a vise.
  4. Remove the retaining pins for the brake master cylinder reservoir.
  5. Remove the reservoir from the brake master cylinder.
  6. Remove the seals from the brake master cylinder.
  7. Clean the master cylinder area with denatured alcohol, or equivalent.
  8. Dry the master cylinder with non-lubricated, filtered air.
scientia non olet · About LEMON Manuals