LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 8.1 G, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Hose Replacement - Rear (Jounce) >> Removal Procedure

Removal Procedure

    Fig 1: Brake Hose - Rear (Jounce)
    GM179855Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle.
  2. Clean all dirt and foreign material from the brake hose and brake pipe fitting.
    3. IMPORTANT: Install a rubber cap or plug to the exposed brake pipe fitting ends in order to prevent brake fluid loss and contamination.
  3. Use a backup wrench on the hose fitting, disconnect the brake pipe fitting from the brake hose, then cap or plug the brake pipe fitting end.
  4. Disconnect the jounce hose from the brake pipe at the frame.
  5. Remove the jounce hose retaining clip.
  6. Remove the jounce hose from the bracket.
  7. Remove the left and the right brake pipes from the jounce hose junction block.
  8. Remove the junction block mounting bolt from the axle.
  9. Remove the jounce hose.
scientia non olet · About LEMON Manuals