Disc Brake Specifications

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Caliper Bore Diameter

2.36 (60.0)

Disc Diameter

10.94 (278.0)

Original Thickness

1.03 (26.2)

Minimum Refinish Thickness ⁽¹⁾

.980 (25.0)

Discard Thickness ⁽²⁾

.970 (25.0)

Lateral Runout

.0015 (.04)

Thickness Variation

.001 (.025)

⁽¹⁾	Manufacturer does not recommend resurfacing rotors when replacing brake pads. Resurface rotors only when there is a brake pulsation complaint or scoring greater than .060" (1.5 mm).

⁽²⁾	Use specification stamped on rotor (if available).