LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 8.1 G, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Backing Plate Replacement >> Installation

Backing Plate Replacement: Installation

WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake shoe and actuator onto the backing plate.
  2. Position the park brake shoe, actuator, and backing plate over the rear hub.
  3. Install the park brake cable bracket and the 2 retainers.
  4. Install the rear hub. See appropriate REAR SUSPENSION article in SUSPENSION. The rear hub, backing plate, park brake cable bracket, and park brake actuator will be installed as an assembly.
  5. Install and connect the rear park brake cable to the bracket at the rear wheel. See REAR DRUM PARK BRAKE CABLE  or REAR DISC PARK BRAKE CABLE  .
  6. Connect the park brake cable return spring to the park brake actuator and bracket at the rear wheel.
  7. Install the rear rotor. See BRAKE ROTOR (REAR)  .
  8. Install the rear caliper bracket. See CALIPER BRACKET (REAR)  .
  9. Install the rear wheels and tires.
  10. Adjust the park brake at the equalizer.
  11. Lower the vehicle.
scientia non olet · About LEMON Manuals