Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the splash shield (15 series).
- Install the splash shield (25/35 series).
- Install the hub and bearing assembly. Refer to WHEEL HUB, BEARING & SEAL REPLACEMENT (RWD) or WHEEL HUB, BEARING & SEAL REPLACEMENT (4WD) in Front Suspension
- Install the tire and wheel assembly
- Remove the safety stands
- Lower the vehicle