LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 8.1 G, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1688 (Disc Brakes (Except Cab & Chassis, & Hd)) >> Repair Instructions >> Front Brake Caliper Hardware Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly
  3. Remove the caliper from the mounting bracket and support the caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the hydraulic brake flexible hose from the caliper. Refer to Front Brake Caliper Replacement 
    4. Fig 1: View Of Disc Brake Pads & Brake Caliper Mounting Bracket
    GM369668
  4. Remove the disc brake pads from the disc brake caliper mounting bracket
  5. Remove the disc brake pad retainers from the disc brake caliper mounting bracket
  6. Inspect the disc brake hardware. Refer to Front Disc Brake Mounting and Hardware Inspection 
    7. Fig 2: View Of Caliper, Pin, Boots & Caliper Mounting Bracket
    GM344219
  7. Remove the caliper pin boots (4) from the disc brake caliper mounting bracket (3).
scientia non olet · About LEMON Manuals