LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Pushrod, Brake Pedal Pin & Stoplamp Switch
    GM156233Courtesy of GENERAL MOTORS CORP.
  1. Remove the pushrod retainer from the brake pedal pin.
  2. Remove the stop lamp switch from the pushrod.
  3. Disconnect the electrical connector from the stop lamp switch.
scientia non olet · About LEMON Manuals