LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Pushrod, Brake Pedal Pin & Stoplamp Switch
    GM156233Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the stop lamp switch.
  2. Install the stop lamp switch onto the pushrod.
  3. Install a new pushrod retainer on the brake pedal pin. Use an 11 mm (7/16 in) socket in order to push a new clip onto the pin.
scientia non olet · About LEMON Manuals