LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pipe Replacement >> Removal Procedure

Removal Procedure

CAUTION: Always use double-walled steel brake pipe when replacing brake pipes. The use of any other pipe is not recommended and may cause brake system failure. Carefully route and retain replacement brake pipes. Always use the correct fasteners and in the original location for replacement brake pipes. Failure to properly route and retain brake pipes may cause damage to the brake pipes and brake system resulting in personal injury.
IMPORTANT: Brake pipes that run parallel to each other must maintain a 6 mm (1/4 in) clearance.
  1. Disconnect the brake pipe fittings.
  2. Remove the brake pipe fasteners from the vehicle.
  3. Remove the brake pipe from the vehicle.
scientia non olet · About LEMON Manuals