LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pedal Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Pushrod, Brake Pedal Pin & Stoplamp Switch
    GM156233Courtesy of GENERAL MOTORS CORP.
  1. Remove the pushrod retainer from the brake pedal pin.
  2. Remove the stoplamp switch from the brake pedal pushrod pin.
  3. Remove the pushrod from the brake pedal pin.
    4. Fig 2: Instrument Panel Center Support Bracket, Reinforcement, Steering Column Bracket & Bolts
    GM715046Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts (2) that retain the instrument panel center support bracket to the steering column bracket (1).
  5. Remove the bolt (3) that retains the reinforcement to the instrument panel center support bracket.
  6. Disconnect the electrical connector from the remote control door lock receiver.
  7. Remove the instrument panel center support bracket (4).
    8. Fig 3: Brake Pedal Nut, Bolt, Bushing & Spacer
    GM156229Courtesy of GENERAL MOTORS CORP.
  8. Remove the brake pedal nut.
  9. Remove the brake pedal bolt.
  10. Remove the brake pedal.
  11. Remove the bushings and the spacer from the brake pedal.
scientia non olet · About LEMON Manuals