LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Reservoir Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Expanded View Of Master Cylinder Reservoir
    GM370589Courtesy of GENERAL MOTORS CORP.
  1. Remove the master cylinder from the vehicle. Refer to Master Cylinder Replacement  in Hydraulic Brakes.
  2. Drain the brake fluid from the reservoir.
  3. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only the flange.
    4. Fig 2: View Of Master Cylinder Seals
    GM370588Courtesy of GENERAL MOTORS CORP.
  4. Remove the reservoir body by pulling the body straight up and away from the cylinder body.
  5. Remove the seals from the reservoir.
scientia non olet · About LEMON Manuals