Removal Procedure
- Remove the instrument cluster bezel.
- Four clips across the top edge, and four clips across the bottom edge, retain the bezel.
- For vehicles equipped with tilt wheel, move the steering column to the lowest position.
- For vehicles without tilt wheel, you may have to lower the column.
- Disconnect the electrical connectors from the headlamp switch and the dimmer control and accessory switches.
Courtesy of GENERAL MOTORS CORP.
- Remove the four screws that retain the instrument cluster.
- Remove the instrument cluster from the vehicle. Keep fingers and other foreign objects away from the flexible circuit connections.
Courtesy of GENERAL MOTORS CORP.