Removal Procedure
- Remove the knee bolster. Refer to Knee Bolster Replacement .
- Remove the knee bolster reinforcement.
- Remove the knee deflector bracket.
- Remove the tubular tie bar from under the steering column.
- Remove the steering column.
- Remove the IP storage compartment door. Refer to Storage Compartment Replacement - IP .
Courtesy of GENERAL MOTORS CORP.
- Remove the left and the right lower instrument panel pivot bolts.
Courtesy of GENERAL MOTORS CORP.
- Remove the center support screw.
- Pivot the instrument panel.
Courtesy of GENERAL MOTORS CORP.