Defroster Actuator

REMOVAL PROCEDURE
1. Remove the right knee bolster.
2. Remove the right cowl trim panel.
3. Disconnect the defrost actuator vacuum hose from the defrost actuator (1).
4. Depress the retaining clip and remove the defrost actuator (1) from the air distribution housing (2).

INSTALLATION PROCEDURE
1. Install the defrost actuator (1) to the air distribution housing (2).
2. Connect the defrost actuator vacuum hose to the defrost actuator (1).
3. Install the right cowl trim panel.
4. Install the right knee bolster.