Hood Release Lever Replacement

Hood Release Lever Replacement

Removal Procedure

1. Remove the left cowl side trim panel. Refer to Cowl Side Trim Panel Replacement (Cowl Side Trim Panel Replacement).
2.



Remove the screws that retain the hood release lever to the cowl side trim panel.




3. Remove the hood release cable from the hood latch. Refer to Hood Primary Latch Release Cable Replacement (Hood Primary Latch Release Cable Replacement) in Body Front End.

Installation Procedure




1. Install the hood release cable to the hood latch. Refer to Hood Primary Latch Release Cable Replacement (Hood Primary Latch Release Cable Replacement) in Body Front End.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws that retain the hood release lever to the cowl side trim panel.

Tighten the hood release lever screws to 8 Nm (71 lb.in.).

3. Install the left cowl side trim panel. Refer to Cowl Side Trim Panel Replacement (Cowl Side Trim Panel Replacement).