LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> C3500 HD 8.1 G, Standard >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Suspension - Suspension Damping & Automatic Level Control >> Repair Instructions >> Electronic Suspension Rear Position Sensor Replacement - Left Side (15 Series) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the wheel and tire assembly from the vehicle. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: Rear Position Sensor (15 Series)
    GM582438Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the sensor harness connector from the vehicle harness connector.
  4. Remove the bolt from the real time damping (RTD) sensor link bracket.
  5. Spread the bracket open until the bracket can be removed from the upper control arm.
  6. Remove the bolts from the frame.
  7. Remove the position sensor from the vehicle.
scientia non olet · About LEMON Manuals