LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> C3500 HD 8.1 G, Standard >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Suspension - Suspension Damping & Automatic Level Control >> Repair Instructions >> Electronic Suspension Rear Position Sensor Link Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Link Rods To Ball Studs Using J 38185
    GM613614Courtesy of GENERAL MOTORS COMPANY
  1. Using the J 38185 install to link rod to the ball stud on the sensor lever and the frame bracket.
  2. Install the RTD sensor to the vehicle. Refer to Electronic Suspension Rear Position Sensor Replacement - Left Side (15 Series) , Electronic Suspension Rear Position Sensor Replacement - Left Side (25 Series) , or Electronic Suspension Rear Position Sensor Replacement - Right Side (25 Series) .
scientia non olet · About LEMON Manuals