LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> C3500 HD 8.1 G, Standard >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Suspension - Suspension Damping & Automatic Level Control >> Repair Instructions >> Electronic Suspension Front Position Sensor Replacement (25 Series 2WD) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Front Position Sensor & Bolt (25 Series 2WD)
    GM516260Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the sensor harness connector from the vehicle harness connector.
  3. Remove the wheel speed sensor wire from the RTD sensor bracket.
  4. Remove the RTD sensor link bracket bolt from the upper control arm.
  5. Remove the bolt from the frame.
  6. Remove the position sensor from the vehicle.
scientia non olet · About LEMON Manuals