LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> C3500 HD 8.1 G, Standard >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Suspension - Suspension Damping & Automatic Level Control >> Repair Instructions >> Automatic Level Control Air Dryer and Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the automatic level control air dryer to the automatic level control air compressor.
  2. Push the air dryer/pressure sensor assembly in while rotating the air dryer/pressure sensor assembly counterclockwise until the assembly attaches to the automatic level control air compressor body.
  3. Install the air dryer/pressure sensor assembly retaining screw.
  4. Connect the electrical connector to the pressure sensor.
  5. Install the automatic level control air compressor to the vehicle. Refer to Automatic Level Control Air Compressor Replacement .
scientia non olet · About LEMON Manuals