Installation Procedure
- Align the marks made during the removal procedure on the steering shaft and the steering wheel.
- Install the steering wheel onto the steering shaft.
- Refer to FASTENER NOTICE
in Cautions and Notices.
Install the steering wheel nut to the steering shaft.
Tighten
Tighten the nut to 40 N.m (29 lb ft).
- Install the horn switch. Refer to Horn Switch Replacement - On Vehicle .
- Install the inflator module. Refer to Steering Wheel Inflatable Restraint Module Replacement in SIR.
- Enable the SIR system. Refer to Disabling the SIR System in SIR.