Automatic Transmission Shift Lock Control Disassemble - Off Vehicle (Column Shift)

Fig 1: View Of Automatic Transmission Shift Lock Control Actuator

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Refer to SIR CAUTION in Cautions and Notices.

Disable the inflatable restraint steering wheel module. Refer to Disabling the SIR System in SIR.

IMPORTANT:

The abrasion sleeve located on the steering column wire harness assembly must be reinstalled. Make note of what connector is coming out of the abrasion sleeve for installation purposes.

Put the shift lever clevis into the neutral position.
Use a small screwdriver to pry the automatic transmission shift lock control away from the steering column jacket assembly and the cable shift cam assembly.