Removal Procedure
- Disconnect the negative battery cable.
- Remove the I/P trim panel. Refer to Instrument Panel Lower Trim Panel Replacement .
- Remove the center console, if equipped. Refer to Console Replacement (Base Console) , Console Replacement (Luxury Console) , Console Replacement (Console w/ Extension) .
- Remove the I/P extension, if equipped. Refer to Instrument Panel Extension Replacement (Non-Luxury) , Instrument Panel Extension Replacement (Luxury) .
- Remove the driver side knee bolster. Refer to Knee Bolster Replacement (Luxury) , Knee Bolster Replacement (Non-Luxury) .
- Remove the lower I/P trim panel. Refer to Instrument Panel Lower Trim Panel Replacement .
- Remove the passenger side air bag module. Refer to Instrument Panel Inflatable Restraint Module Replacement in SIR.
- Remove the radio. Refer to Radio Replacement in Entertainment.
- Remove the HVAC control. Refer to HVAC Control Module Replacement in HVAC Systems-Manual or Automatic.
- Remove the accessory switch housing. Refer to Accessory Switch Replacement .
- Remove the left air louver housing. Refer to Instrument Panel Outer Air Outlet Deflector Replacement - Left Side in Heating, Ventilation and Air Conditioning.
- Remove the steering column. Refer to Steering Column Replacement in Steering Wheel and Column.
- Remove the VIU, if equipped. Refer to OnStar Vehicle Interface Unit Replacement in Cellular Communication.
- Remove the VCU, if equipped. Refer to OnStar Vehicle Communication Unit Replacement in Cellular Communication.
- Remove the remote control door lock receiver module, if equipped. Refer to Remote Control Door Lock Receiver Replacement in Keyless Entry.
- Remove the data link connector from the I/P. Refer to Data Link Connector Replacement in Data Link Communications.
- Remove the park brake release lever from the I/P. Refer to Parking Brake Release Handle Assembly Replacement in Park Brake.
- Remove the I/P cluster. Refer to Instrument Cluster Replacement .
- Remove both front window air duct from the I/P assembly.
- Remove the harness from the I/P. Refer to Instrument Panel Wiring Harness Replacement .
- Remove the I/P assembly retaining bolts (3) and nuts (4).
- Remove all harness hold down retainers from the I/P assembly.
- Remove the I/P assembly from the vehicle.
CAUTION:
Refer to BATTERY DISCONNECT CAUTION in Cautions and Notices.
CAUTION:
Refer to SIR CAUTION in Cautions and Notices.